AB-COR 950 SW is a two component, 100% solids, highly abrasion resistant epoxy coating designed for corrosion control. AB-COR 950 SW uses bionic technology adapted from the adhesion techniques of the gecko and the sea mussel to apply a tight bonding, hydrophobic, highly cross-linked polymer network to steel surfaces. AB-COR 950 SW is also used as a highly mechanical and chemical resistant, hard wearing coating that offers excellent anti-corrosion properties. AB-COR 950 SW is resistant to crude oil, mineral oil, water, seawater, brackish water, neutral salt solutions, diluted acids, oil, fat, lubricants, fuels, wet temperatures up to 195° F and dry heat up to 275° F. AB-COR 950 SW must be applied with airless spray equipment, flow heaters and heated hoses and is suitable for high build application in one coat (multiple coats also possible). Due to this unique formulation, a primer is not required and the coating will not shrink, nor sponsor plasticizer migration.